Virtual Polymer Compounds, LLC
Virtual Polymer Compounds, LLC
10478 Ridge Road
Medina, New York 14103
Phone: (585) 735-9668
Fax: (585) 735-9965
Email: Contact Us
Website: www.vpcfiberglass.com
Print Back
Our Custom Buildings have been used to house power equipment, radar equipment, telecommunications gear, and a variety of instrumentation, to name just a few applications. Whenever chemical and environmental challenges are present, our experienced team and state-of-the-art technology can provide you with a product to meet your specific needs.

VPC is proud to count among its many customers the US Coast Guard, US Navy, Proctor & Gamble, DuPont, and Chevron. Our design team will work with you to make sure the end result is a cost-effective and functional shelter that meets your unique needs. Our engineering staff will provide technical drawings and specifications, and our experienced fabricators will turn your design into a reality. We couple our collaborative design process with exceptional customer service, making sure VPC delivers the right solution for you. While our shelters listed below come with standard equipment or sizes, we also take a project-by-project approach and can easily modify widths and depths or customize equipment packages and options.
Unit of Measure

Specifications

Brands

 N/A Virtual Polymer Compounds, LLC aka VPC Fiberglass

Minimum One-Piece Molded Size

 N/A 4 x 4 ft

Maximum One-Piece Molded Size

 N/A 14 x 14 ft

Modular Construction

 N/A Constructed in Size at 20 ft. W and No Limitation on Length.

Material

 N/A Fiberglass

Options and Upgrades

 N/A 30"x36" Equipment Mounting Board: Installed on side or rear walls for easy and secure equipment or instrumentation mounting. Unistrut is also available for heavier applications. Chlorination Option: Includes, floor, 12"x12" window, light and exterior light switch. Exhaust Fan: 60 CFM, 110 volt with thermostat. Heat: Baseboard type 110 volt, 500 watt heater with integral thermostat. Light: 60 watt, incandescent light: sealed fixture with plastic base assembly. Fluorescent lighting, exterior lighting and exterior alarm lighting also available. Vinyl Wrap: Any enclosure can be customized with a vinyl finish. Window: 12" x 12" window can be provided in the door or walls of the unit.

Division

 N/A VPC Traditional

Industries

 N/A Air Handling/Heating, Ventilation, & Air Conditioning (HVAC) Chemical Marine Mining Oil & Gas Power Security & Transportation Telecommunication Water & Wastewater

Applications

Packaged Pump Skid Cover

 N/A An all fiberglass constructed maintenance shed which can be used for storing chemicals and cleaning equipment; outfitted with a light, heat and exhaust. 8’ X 8’ X 8’ model.

Maintenance Equipment Shed

 N/A An all fiberglass constructed maintenance shed which can be used for storing chemicals and cleaning equipment; outfitted with a light, heat and exhaust. 8’ X 8’ X 8’ model.

Phosphorus Removal Shelter

 N/A This fiberglass equipment building is used by the United States Military to store various communication and electrical equipment. The large double doors allow plenty of room for the equipment to be taken in and out of the building. 10’ X 12’ X 8’ model.

Equipment Building

 N/A This fiberglass equipment building is used by the United States Military to store various communication and electrical equipment. The large double doors allow plenty of room for the equipment to be taken in and out of the building. 10’ X 12’ X 8’ model.

Communications Shelters

 N/A Fabricated for the US Coast Guard this building was built with Radio Frequency Interference (RFI) shielding to protect the communication equipment stored inside. Fiberglass is an ideal composite material in conditions where salty sea spray and extreme weather conditions exist. 8’ X 12’ model.

Noise Reduction Shelters

 N/A Provided with only a picture and dimensions of a well head from a customer in North Carolina, our fabricators created this lift-top fiberglass cover. An interior flange allows the protective cover to be secured to the concrete slab. Well head covers are used to help prevent vandalism and protect pumps, valves and pipes.

Well Head Cover

 N/A Provided with only a picture and dimensions of a well head from a customer in North Carolina, our fabricators created this lift-top fiberglass cover. An interior flange allows the protective cover to be secured to the concrete slab. Well head covers are used to help prevent vandalism and protect pumps, valves and pipes.

Pump Cover

 N/A A chlorine pump and tank solution for the highly corrosive environment of a Wastewater Treatment Facility. As with most chemical pump shelters, VPC provided its standard package which includes, 12" x 12" window in door, exterior switch for light and fan, exhaust fan and intake louver with gravity shutter, insect screen and rain hood, vapor-tight light, heater, load center and containment floor. 6' x 7.5' x 6' model.

Chemical Feed Pump Shelter

 N/A A chlorine pump and tank solution for the highly corrosive environment of a Wastewater Treatment Facility. As with most chemical pump shelters, VPC provided its standard package which includes, 12" x 12" window in door, exterior switch for light and fan, exhaust fan and intake louver with gravity shutter, insect screen and rain hood, vapor-tight light, heater, load center and containment floor. 6' x 7.5' x 6' model.

Water Pump Cover

 N/A Our in-ground vaults are designed for use below grade to house and protect any number of pumps, valves and controls. This fiberglass shelter is radio frequency (RF) transparent, allowing access to sensitive electronics and electrical equipment remotely and without interference. 6' x 3' x 2' model.

In-Ground Vault

 N/A Our in-ground vaults are designed for use below grade to house and protect any number of pumps, valves and controls. This fiberglass shelter is radio frequency (RF) transparent, allowing access to sensitive electronics and electrical equipment remotely and without interference. 6' x 3' x 2' model.

Driver Relief Station

 N/A Created for Regional Transportation District (RTD), one of the top Metro Systems in the United States, as a Driver Relief Station for their newly constructed West Corridor Rail Line. The purpose of the Driver Relief Station is to allow RTD employees easy access to a restroom directly along their transit route. 7’ x 10’ model.